Approximation of math model of the combined cutting soil`s critical depth with influence of working speed

Автор(и)

DOI:

https://doi.org/10.26884/1707.1302

Ключові слова:

angle cutting, depth loosening, operating speed, critical depth, free cutting, blocked cutting, combined cutting

Анотація

The purpose is approximation of mathematical model of processes of cutting and loosening of the soil for the receipt of analytical dependence of determination of critical depth of loosening taking into account the working speed at the combined tiered destruction of soil. An approximation based on regression analysis used in the processing of data derived from experiments with a number of parallel observations in the experiment. Built graph of the dependency between relative critical depth, working speed of the working body and angle cutting soil. Identify the value of critical depth loosening for five types of soil and full range of working speeds, depending on the physical and mechanical properties of the soil.

Біографії авторів

Sviatoslav Kravets, National University Of Water And Environmental Engineering

Professor

Roman Zoria, National University Of Water And Environmental Engineering

Assistant

Посилання

Baladynskyi V.L., 1988. Performance and durability of earthmoving reclamation ma-chines. Baladynskyi V.L., Puzychev Iu.V., Smyrnov V.N., Kyslenko A.A. Kiev, Urozhai, 152 (in Russian).

Hryshyn V.K., 1975. Statistical methods for the analysis and planning of experiments. Moscow, Publishing MNU, 128 (in Rus-sian).

Haiko G., Zakharchenko P., 2016. Per-spec-tives of tunnel passages construction under the Dnieper. Kiev, Underwater tech-nologies, 72-79.

Kravets S.V., Zoria R.V., 2015. Effect of speed on the critical depth of cut. Herald NUWEE, Rivne, Technical science, Vol.72(4), 92-103. - (in Ukrainian).

Kravets S.V., Stinio O.V., 2013. Determi-nation of the critical depth of cut in the combined tiered destruction of soil. Herald Building. Materials Science. Mechanical en-gineering. Series: Hoisting-and-lifting transport, construction and road machinery and equipment. Vol 72, 128-137. - (in Ukrainian).

Kravets S.V., Stinio O.V., 2016. Determi-nation of blocked cutting energy intensity factor and loosening the soil. Scientific Journal NGU, Vol.3, 24-28 (in Ukrainian).

Kravets S.V., Kovanko V.V., Luk’ianchuk O.P., 2015. Scientific basis of creating earth-tiered machines and underground-moving devices. Monograph, NUWEE, 24-48 (in Ukrainian).

Kravets S.V. Romanovskyi O.L., Kyry-kovych V.D., Muzychuk I.M., 2006. Effect of hydrostatic pressure on critical depth of the combined tiered cutting soil Herald Visnuk NUWEE, Vol.2(34), Part 2, Rivne, 23-243 (in Ukrainian).

Kravets S.V., 1999. Soil-protection and energy-saving machines for laying under-ground utilities. (Basic theory, design and creation). Rivne, RDTU, 37-52. - (in Ukrainian).

Lvovskyi E.N., 1988. Statistical meth-ods for constructing empirical formulas. Moscow, High school, 148-149. - (in Russian).

Vasylenko P.M., Pohorelyi L.V., 1985. Fundamentals of Scientific Research. Кiev, High school, 164-166. - (in Russian).

Vetrov Yu.A., 1971. Soil cutting with digging machines. Moscow, Mashynostro-enye, 136. - (in Russian).

Venykov V.A., Venykov V.H., 1984. Theory of similarity and modeling. Мoscow, High school, 248-251. - (in Russian).

Voronov V.H., Ehorov A.E., Azarov H.N., Koval A.V., 1986. Investigation of devices and automation systems by the method of experiment planning. Kharkiv, High school, 131. - (in Russian).

Rebrova I.A., 2010. Experiment plan-ning, tutorial. Omsk, SibADI, 76-89. - (in Russian).

Rydakov G.M., 2004. Basics of plan-ning a research experiment. Tashkent, Ukityvchi, 33-34. - (in Russian).

Rohov V.A., Pozdniak H.H., 2005. Technique and practice of technical experi-ments: study allowance of high ed. Мoscow, Publishing house Academy, 103-105. - (in Russian).

Komarov M.S., 1982. Fundamentals of Scientific Research. Lvov, High school, 38-46. - (in Russian).

Sydenko V.M., Hrushko Y.M., 1979. Fundamentals of Scientific Research. Kharkiv, High school, 131-132.

Sukharev E.A., 1989. Methods of sci-entific research of construction and meliora-tive technic, Tutorial. Кiev, UMK HE, 68-79. - (in Russian).

Stanevskyi V.P., 1984. Perfection of the working process of digging. Kiev, High school, KGU, 36-64. - (in Russian).

Sukach M.K., Lysak S., 2017. Kine-matics parameters of twosectional trench-er's. Kiev, Underwater technologies, 16-22.

##submission.downloads##

Опубліковано

2017-10-30

Як цитувати

Kravets, S., & Zoria, R. (2017). Approximation of math model of the combined cutting soil`s critical depth with influence of working speed. Pidvodni Tehnologii, (7), С.34–41. https://doi.org/10.26884/1707.1302

Номер

Розділ

Статті